Remodel Project Update 13

Plumbing and Electric
July 12, 2003

Time to hook back up to the "grid", with water and electric.  I used PVC underground, copper above ground, and PEX inside the house.  You can't have enough shut-off valves.

 

Since we're blessed with 70 lbs. of pressure, I had to install a pressure reducer for the inside plumbing, which drops it to 45 lbs.  This is much easier on your faucets.  The irrigation and hose bibs are hooked up so they get the full 70 lbs. of pressure.
The PEX tubing has to be kept 6" away from the water heater vent (smokestack), so I used copper flex connectors to hook up to the water heater.  Note the shutoff valve on the cold water line.
Another view of the PEX tubing showing the copper distribution manifolds.
 

July 13, 2003

YAAAAAAHOOOOOOOO!!! We got a flushie! 

I don't mean to wax eloquent about the lowly toilet, but for the past year, every Sunday night I've had to empty our RV's blackwater tank to this 20 gallon transfer tank, and roll it over to our sewer clean-out and dump it, rinse it out, then pour more blue stuff in the holding tank.  I can't tell you how wonderful it is to just push the flush handle and never have to deal with it again!    

July 25, 2003

I ended up using almost every slot on a 200 Amp panel (a couple of those breakers are spares).  The new code requires Arc-Fault breakers on the bedrooms.  For you sharp-eyed electricians, this panel is still a sub-panel until I get permanent power hooked up to it, so I had to keep the neutrals insulated from the cabinet.

Making up one of the hundred or so boxes on the inside wiring.
Since it is left unfinished, I was able to complete the electrical for the basement and install all the lighting.  It sure is nice having bright light down there, with a switch at the stairs.
With all the posts and beams, it kind of looks like a mine.
I wired lights along the ridge in the attic also.  It makes it nice when having to work up there.
Meanwhile, back at the ranch, my poor wife is still slopping along with the stripper.  It's a nasty job: sticky, smelly, tedious, and the stuff burns like fire if you get it on you (did I mention explosive?)  This is about her sixth gallon.  Her favorite is the Kleen Strip in the red can.  We tried the citrus-based stripper, and though it is more benign, it doesn't work as well.

Click for Remodel Update 15 (Insulation and Drywall)

Click to return to Remodel Project Home

Hit Counter

©2008 Kuffel Creek Press.  All Rights Reserved

Contact us at support@kuffelcreek.com